Rentagro

The RENTAGRO Grain Loss Monitor is a revolutionary system which registers, with highly sensor pads, the percentage of grains that are lost during the harvesting and thrown out with the chaff and straw.

The information it gives allows the user to regulate the combine devices as well as optimize the harvesting speed. Protect all the effort you put to obtain a good yield. With Rentagro all your grains go where they have to go.

HOW DOES IT WORK?

The system monitors the quantity of grain that is lost in the sieve and the straw walker with the sensors that separate mechanically and electronically the grain impacts from those produced by the chaff and other waste.

In the control panel the losses appear proportionally quantified by means of a set of lights graded  in green, yellow and red for acceptable, critical and excessive loss, respectively.

The regulation knobs are used to give more or less sensitivity to the sensor pads of the straw-walker or the sieve, besides regulating the grain size that is used for both channels simultaneously.

RENTAGRO GIVES YOU THE CLUES FOR AN EFFICIENT HARVEST.

To know at all times and with precision the losses of the unity to keep it continually within the desired values.

To work at optimum speed to make the most of the available harvesting capacity avoiding overload or blockages.

To adjust precisely the parameters of the combine, adapting it to the variable conditions of the harvest, avoiding unnecessary stops and the consequent delay.

To detect working problems in the separation and cleaning systems of the machine.